修正的交互加速度补偿机动目标跟踪算法

为了提高交互加速度补偿算法(IAC)的滤波精度,通过引入一个改进因子自适应地调整过程噪声协方差,给出了一种新的算法.在给定的初始条件下,通过蒙特卡罗仿真,将修正的IAC算法与IAC算法进行比较,结果表明修正的交互加速度补偿算法在目标发生机动时具有更好的跟踪性能.     

Reduction of global effects on vehicles after IED detonations

Global effects caused by the detonation of an IED near a military vehicle induce subsequent severe acceleration effects on the vehicle occupants. Two concepts to minimize these global effects were developed, with the help of a combined method based on a scaled experimental technology and numerical simulations. The first concept consists in the optimization of the vehicle shape to reduce the momentum transfer and thus the occupant loading. Three scaled V-shaped vehicles with different ground clearances were built and compared to a reference vehicle equipped with a flat floor. The second concept, called dynamic impulse compensation (DIC), is based on a momentum compensation technique. The principal possibility of this concept was demonstrated on a scaled vehicle. In addition, the numerical simulations have been performed with generic full size vehicles including dummy models, proving the capability of the DIC technology to reduce the occupant loading.     

Counterinsurgency force ratio: strategic utility or nominal necessity

As a consequence of intervention in Iraq and Afghanistan, force ratio for counterinsurgency (COIN) has come under increased scrutiny. Reduced to its essence, the issue is simply, ‘How many troops does it take to get the job done?’ This answer has been sought by the US military, academia, and think tanks. There have been numerous responses, culminating in several ‘plug-and-play’ equations for minimum force ratios in COIN operations. Due to the impossibility of determining precisely how many insurgent forces there are, it has become common to base force ratios on the population of the country. In the realm of policy, the question above is posed as, ‘How many of our troops does it take to get the job done?’     

基于NFxPEM算法的调制气流声源的非线性补偿

针对调制气流声源存在较强的谐波畸变,将声源系统等效为Hammerstein非线性模型,利用该模型下的预失真技术对声源进行非线性补偿研究。根据辨识的Hammerstein模型中静态非线性部分带有直流分量的特点,给出了考虑直流分量补偿的预失真算法,并用数值仿真验证了算法的准确性和直流分量补偿的必要性。在非线性补偿实验中,根据单频信号辨识得到Hammerstein模型参数,采用NFxPEM算法求得对应的预失真Wiener模型参数和预失真波形。实验结果表明, 与直接发射相比,补偿发射后声波的功率谱中谐波能量有所下降,而基频能量有小幅度的上升,说明了研究思路的正确性。     

机房漏水检测与精确定位装置研究

机房漏水是危及精密信息设备长期稳定可靠运行的重大安全隐患。为了解决传统定位装置难以实现漏水点精确定位的问题,从传感电缆的检漏原理出发,利用分压补偿原理,通过STEP7软件编程,设计了一个结合自检、漏水检测和漏水定位3种功能的机房漏水检测与定位装置。在此基础上搭建了实验系统,经测试实验,结果表明短距离定位精度可以达到1．70％,从而证实了该装置检测的有效性和定位的精确性。     

双轴平台动力调谐陀螺漂移补偿技术

在双轴平台动力调谐陀螺惯导系统中,动力调谐陀螺仪漂移与测量轴重力分量密切相关.根据动力调谐陀螺与重力相关漂移项的特点,提出了双轴平台陀螺漂移误差的补偿方法.通过安装在双轴平台上的加速度计测量载体姿态,并计算重力在陀螺两个测量轴的分量,建立了陀螺漂移模型,对方位漂移进行补偿.实验证明,该方法有效地提高了双轴平台方位漂移精度.     

锁相环在电流隔离测量中的应用研究

探讨了采用锁相环频率跟踪,通过环路补偿达到磁平衡的方法,隔离测量直流和低频、中频交流电流,利用磁性材料自身特性,进行温度补偿,用低成本达到较高的稳定度和测量精度.     

基于云重心评价法的雷达辐射源威胁评估

在联合防空作战背景下,建立雷达辐射源的评估指标集,利用云重心评价法,通过云模型初始化、拟定系统状态、确定指标权重、计算加权偏离度和确定评估模型的评语集5个步骤对目标进行威胁评估。计算指标权重多数利用AHP法、环比法等,受主观因素影响较大,为减少人为因素的干扰,采用排队法计算各指标的权重。最后进行仿真和案例分析,表明该方法的有效性和实用性。     

运输机装载规划视景仿真技术的研究

以运输机装载规划过程为仿真对象,建立简化数学模型,然后结合Unity3D引擎,运用视景仿真技术相关知识,把运输机装载规划全过程、运输机装载过程中质心变化等进行实时显示。运用视景仿真技术进行运输机装载规划,可对真实装载规划过程起到重要的引导作用,并且能够有效缩短运输机装载规划周期,提高运输机装载效率。     

基于直达波补偿的星地双站SAR滑动聚束模式频域成像算法

星地双站合成孔径雷达以星载系统为机会照射源,地面接收机接收直达波和散射波信号进行同步和成像处理。本文介绍了星地双站SAR系统结构,对基于直达波进行距离向脉冲压缩后的信号调频率、距离徙动以及二维频谱的空变性进行了分析。在此基础上,基于方位向预处理过程、直达波补偿以及非线性Chirp Scaling算法,提出了适合该模型的频域成像算法,并通过点目标仿真验证了该成像算法的有效性和性能。星地双站SAR实测数据进一步验证了该成像算法的有效性。